Heat & refrigeration System
|
We
are known Manufacturers, Suppliers, Exporters of Heating System,
Refrigeration System from India. We are Manufacturer Hot Plates,
Vertical Autoclaves, Horizontal Autoclaves, Water Bath Chamber etc. |
|
|
|
Hot Plates (rectangular)
JEQ-12 : RECTANGULAR (with cast-iron plate)
Body made of PCRC sheet finished in enemel paint,
rectangular cast iron plate with insulated elements to work on 220V AC
50 Hz single phase. |
Sizes of plates in inches Rating
(a) 10 x 12 x 6,1.2 KW
(b) 10 x 16 x 6,1.5 KW
(c) 12 x 18 x 6,2.0 KW
(d) 18 x 24 x 6,3.0 KW |
JEQ-12 (A) : RECTANGULAR (Stainless steel top) Same as above. |
Optionals for above models :
(a) Pyrometer with thermocouple for temp. indication.
(b) Digital Temp. Indicator-cum-Controller. |
|
|
|
|
Autoclaves (vertical)
JEQ-1 (A) : A versatile electrically
heated sterilizer under saturated steam of adjustable pressure of 10
to 20 psi. Double walled construction with boiler made of stainless
steel, outer shell made of mild steel or stainless steel sheet. The
lid is made of stainless steel or gun-metal plate, tightening alround
with wing nuts. Gasket made of moulded jointless Neoprene rubber.
Equipped with water level arrangement, pressure gauge, air/steam
release cock, spring loaded safety valve adjustable to any selected
point from 10 psi to 20 psi, accuracy 3 psi and drain, cord-plug
etc.; to work on 220 V AC 50 Hz single phase.
Chamber size in mms & load :
(a) 250 x 450 (1.5 KW) (b) 300 x 500 (2.0 KW)
(c) 350 x 550 (3.0 KW)(d)400 x 600 (4.0 KW)
(e) 450 x 600 (4.0 KW) (f) 550 x 750 (5.0 KW)
Optional Accessories :
1.Automatic low water level cut-off device.
2.Pressure control switch.
3.Radial lock (for models JEQ-1(c, d, e & f only).
4.Pedal lift.
5.Stainless Steel basket.
6.Timer.
Note : Models : JEQ-1A (d, e & f) are provided with pedal lifting device.
|
|
|
|
Autoclave Horizontal
JEQ-1 (B) : Construction same as above but in horizontal position and without steam jacket.
Chamber sizes in mms. & load :
(a) 350 x 550 (4KW) (b) 450 x 600 (6KW)
(c) 550 x 750 (6KW)(d) 400 x 1100 (9KW)
Optional Accessories :
1.Pressure gauge.
2.Compound gauge.
3.Automatic low water level cut-off device.
4.Pressure control switch.
|
|
|
|
Autoclave Laboratory (portable)
JEQ-1 (C) : All stainless steel/ Aluminium, seamless, having no joints.Pressure range 15 psi to 18 psi.
Chamber size : Dia. x Height in mms. :
(a) 300 x 300
(b) 300 x 375
|
|
|
|
Water Bath Rectangular
JEQ-2 (A) : Double walled construction. Inner
chamber of stainless steel sheet and outer of mild steel sheet duly
finished in powder coated. The is filled with glass wool for temp.
insulation. Temperature range 50C above ambient to 900C controlled by a
thermostat. Complete with concentric rings, pilot lamp, plug cord etc.
To operate on 220 V AC 50 Hz single phase.
Chamber size in mms. No. of holes & Diameter
(i)300 x 250 x 100 6 holes of 75mm dia.
(ii)300 x 300 x 100 9 holes of 75mm dia.
(iii) 405 x 300 x 100 12 holes of 75mm dia.
Optional Accessories :
Digital Temperature Indicator or indicator-cum-Controller.
JEQ-2 (A) i : same as above but single wall construction. |
Automatic Temp, Control Water Bath / Precision Water Bath |
JEQ-2 (C) : Specifications of bath as
JEQ 2(A) but temperature controlled by Solid State Controller with
stirrer with S.S. rod &blade to make temp. of bath alround
uniform and constant. Chamber of stainless steel sheet.
Temperature range 50C above ambient to 1000C.
Chamber Size : 430 x 240 x 265 mm. |
|
|
|
|
Water Bath Serological
JEQ-2 (B) : Construction of bath as
JEQ-2(A) but with a pyramidal type cover made of stainless steel.
Temperature control by a thermostat 5C above ambient to 90C 1C. Complete
with Temp. Control Knob, on-off switch, pilot lamps, cord-plug etc.
To work on 220 V AC 50 Hz single phase.
Chamber size in mms. Load & No. of racks
(i)300 x 250 x 175 1.0 KW for 2 racks
(ii) 330 x 300 x 175 1.5 KW for 4 racks
(iii) 405 x 300 x 175 2.0 KW for 6 racks
(iv) 605 x 300 x 175 3.0 KW for 8 racks
Optional Accessories :
1. Stirrer with stainless steel rod & blades.
2. Digital Temp. Indicator. or Indicator-cum-Controller.
|
|
|
|
High Temperature Oil Bath
JEQ-7 : Chamber made of
copper/stainless steel sheet. Temperature thermostatically controlled
upto 2700C. Complete with high speed stirrer with speed controller.
Chamber size : in mms.
(i) 250 x 250 x 25 (ii)300 x 300 x 250
(iii) 355 x 355 x 250
|
|
|
|
Refrigerated Water Bath
JRS-02 : Double walled construction,
outer made of mild steel and inner chamber made of stainless steel
sheet. Controlled by Digital temperature controller with glass window
for observation. Heating is achieved by immersion type heater
temperature from 0C to 90C.
Working Chamber : 500 x 250 x 250 mm.
|
|
|
|
Universal Oven (memmert Type)
JEQ-3 (A) : Standard double walled
construction. Inner Chamber made of aluminium or stainless steel
sheet. Exterior made of mild steel sheet finished in powder coated
colour combinations. Three sides heating provides uniform and quick
temperature rise in range of 50C to 300C 2C and is thermostatically
controlled. Provided with 2 or 3 adjustable shelves. L-shaped
thermometer is builtin. Complete with indicator pilot lamps, on-off
switch, thermostat control knob, plug-cord etc. Workable on 220 V AC
50 Hz single phase.
Common Chamber sizes in mms. No. of trays
300 x 300 x 300 x 2
355 x 355 x 355 x 2
455 x 455 x 455 x 2
455 x 605 x 455 x 3
605 x 605 x 605 x 3
910 x 605 x 455 x 3
910 x 605 x 605 x 3
Optional :
1. Air circulating fan.
2. Timer 24 hours.
3. Digital Temp. Indicator.
4. Digital Temp. Indicator-cum-Controller.
|
|
|
|
Humidity System (steam) For Oven
JEQ-3 (A1) : Oven can be provided with
humidity arrangement. Humidity is created by condensation of steam
generated by heaters dipped in water. Humidity is controlled by imported
Humidistat from ambient to 95% , 3% RH.
Common Chamber sizes in mms. No. of trays
300 x 300 x 300 x 2
355 x 355 x 355 x 2
455 x 455 x 455 x 2
455 x 605 x 455 x 3
605 x 605 x 605 x 3
910 x 605 x 455 x 3
910 x 605 x 605 x 3
|
|
|
|
Water Bath Incubator Shaker (metabolic Shaking Incubator)
JEQ-4 (F) : Temperature range from room
temperature to 100C, Thermostatic control with an accuracy of plus
minus 0.5C Double walled inside made of Stainless steel 304 Quality and
outside Mild steel sheet painted in epoxy powder coating. Oscillating
tray is riding on ball rollers. Oscillator speed range 40 to 140
strokes. Built-in L-shape thermometer. To work on 220/230 volts A.C.
Shaking Tray size : Inside (Stainless Steel 304 Qlty.)
275 x 275 x 75mm 6 Ltrs.
275 x 275 x 150mm 12 Ltrs.
405 x 300 x 150mm 18 Ltrs.
|
|
|
|
Oven Vacuum
JEQ-3 (C) : Double walled construction.
Inner round chamber made of stainless steel sheet. Outer made of Mild
steel sheet. filled with glass wool for Temp. insulation. temp. range
500C to 1500C 30C. Body capable of withstanding vacuum of 760mm.
Complete with temperature regulator, Indicator lamp, on-off switch,
cord-plug etc. To work on 220 V AC 50 Hz single phase. Without vacuum
pump.
Chamber size in mms : Dia x Depth.
(i)250 x 250(ii) 250 x 300 (iii)300 x 300
Optionals :
1. Digital Temperature Indicator-cum-Controller.
|
|
|
|
Incubator (memmert Type)
JEQ-4 (A) : Standard double walled
construction. Inner chamber made of aluminium or stainless steel sheet
and outer made of mild steel sheet finished in powder Coated colour
combinations. filled with glass wool for temp. insulation. Double
walled door with double glass window for observation in the chamber.
Temperature range 5C above ambient to 800C 10C controlled by a
thermostat. L-shaped thermometer provided along with pilot lamps, on-off
switch Temp. control knob etc. To work on 220V 50 Hz single phase.
Chamber sizes in mms.
(a)300 x 300 x 300 (b) 355 x 355 x 355
(c) 455 x 455 x 455 (d) 455 x 605 x 455
(e) 605 x 605 x 455 (f) 605 x 605 x 605
(g) 605 x 910 x 605
Optionals :
1. Air circulating fan.
2. Timer 24 hours.
3. Digital Temp. Controller-cum-Indicator.
Note : Oven & Incubator sizes not covered can be fabricated on demand.
|
|
|
|
Orbital Shaking Incubator
JEQ-4(O) : Specially designed to have a combined
operation of Incubation and shaking as well as integral shaker
mechanism, eccentric orbital drive provides horizontal orbital motion
agitation. Incubator is double walled. Exterior of Mild steel finished
in powder coated. Interior made of Stainless steel. Chamber
illumination with Fluorescent light. Glasswool insulation between the
two walls. Temperature is controlled by Digital Display Temperature
Controller cum Indicator. Forced air circulation is provided. The
platform is mounted on heavy duty springs with lotus clamps and S.S.
top. Speed is continuously variable from 50 to 250 RPM and displayed on a
Digital Speed Meter (optional). Provided with a Digital Timer of 999
minutes (Optional). Unit works on 230 V, AC 50 Hz. Supply.
TEMPERATURE RANGE : Ambient + 5c to 60c |
CAPACITY |
FLASKS |
CAPACITY |
FLASKS |
250 ml |
09 |
500 ml |
09 |
250 ml |
16 |
500 ml |
16 |
250 ml |
25 |
500 ml |
25 |
250 ml |
36 |
500 ml |
36 |
|
Optional :
1. Digital Speed Meter
2. Digital Timer of 999 minutes. |
JEQ-4(OR) : Same as above but temperature range is 5C to 60C. |
|
|
|
|
B.o.d. (bio-chemical Oxygen Demand) Incubator (low Temp.)
JEQ-4 (C) : Double walled construction. Inner
chamber made of anodized aluminium sheet/stainless steel with self
supports for wide range of shelf spacing. Supplied with two/three
removeable perforated shelves. Clear inner door of acrylic sheet allows
inspection of material without disturbing chamber temperature. Outer
double walled door is provided with magnetic gasket, lock & key and
door operated lamp illumination. The cabinet is mounted on castors.
Temperature is controlled by a micro processor digital
temperature controller cum indicator from 50C to 500C 10C. Inner air
circulating system provided for uniform temperature in the whole
chamber. A silent sealed compressor with protective devices alongwith
fan cooled condensing coil are placed below the chamber for safe and
efficient working.
Control panel provided at top of cabinet has three indicator
lamps for mains, heating & cooling, voltmeter, temp. controller,
cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
Note : Use of a suitable Voltage Stabilizer is essential.
Size of chamber in mms (WxHxD)Capacity (cu ft.)
500 x 800 x 415 6.10
565 x 865 x 550 10.00
650 x 900 x 550 12.00
700 x 900 x 650 15.00
Optional Arrangements Available :
1.Thermohygrograph.
2.Timer 0-24 hrs. Day/night cycle.
3.CO2/air mixture inlet nozzle.
4.Audio-visual alarm.
5.Automatic Voltage Stabilizer 3 KVA. |
Humidity System (steam) For Bod Incubator |
JEQ-4(C1) : BOD Incubator can be
provided with humidity arrangement. Humidity is created by
condensation of steam generated by heaters dipped in water. Humidity
is controlled by imported Humidistat from ambient to 95%,3% RH. |
|
|
|
For further details contact us at:
Microteknik India
Address: 2759, Timber Market,
Ambala Cantt. - 133006.
Haryana
- India.
Moblie: +91 9896044855
Phone: + 91 - 0171 - 2640855
+ 91 - 0171 - 2644991
+ 91 - 0171 - 4006791
Fax: + 91 - 0171 - 4001891
Email: info@microteknik.com
microteknik@gmail.com
No comments:
Post a Comment