Clean Air System
|
We
are known Manufacturers, Suppliers, Exporters of Clean Air System from
India. We are Manufacturer Air Curtains, Air Showers, Fume Hoods,
Laminar Air Flow Cabinets etc. |
|
|
|
Air Curtains
JCA-01 : Invisible air door, keeps
interior of a clean room dust-free, stops entry of insects, serves as
temperature barrier and isolates heating, cooling & humidity.
Fabricated out of mild steel sheet. Balanced blowers are mounted on
strong inside metal frame. Exterior finished in enamel or hammertone
paint. Wall or roof mountings are provided. Models are available as per
door size :
(i) 2 feet (ii) 2 feet.(iii) 3 feet. (iv) 4 feet (v)6 feet.
|
|
|
|
Air Showers
JCA-03 : Designed to provide protection
from Biological & Particulate contaminations in high traffic
areas and entrances of clean Air Laboratories or rooms.
Outer made of thick CRC sheet duly powder coated. Dynamically balanced
blowers with minimum vibration and noise level draw the air and blow it
through High Efficiency Hepa filters accurate down to 0.3 microns
with efficiency of 99.97% bacteria free area.
Automatic actuating air-shower operation, adjustable time-duration of
air-showers, recirculation of uncontaminated air, adjustable
air-nozzles, clear acrylic door, solid state control system, provision
of fluorescent tube lighting are the main technical features.
(i) Class 10000 (ii) Class 100
|
|
|
|
Fume Hoods
JCA-05 : Fume exhaust hoods are
designed to contain and exhaust toxic, obnoxious, pungent smelling
gasses to protect personnel and equipment in the laboratories. The
"TEKNIK" Fume Hood comprise with international standard on fume
handling systems. A motor driven dynamically balanced blower with
minimal vibration and noise level creates negetive pressure and sucks
contaminated air from work area and throws the same in high-up
atmosphere through ductings.
Fabricated out of thick Duro-board clad from outside in laminated sheet
and inside finished in non-corrosive, chemical resistant Epoxy paint.
An up & down sliding Sash made of Teakwood mounted in thick glass
sheet and workable on weights & pulleys system counter balanced is
provided. Fluorescent lighting is provided in the chamber. A gas tap
and electric power plug also provided in addition to stainless steel
wash basin and suitable water tap. A work-bench with cupboard is
provided to hold the hood at suitable level from ground.
(i) Chamber : 4x2x2
(ii) Chamber : 6x2x2
(iii) Chamber : 8x3x3
|
|
|
|
Laminar Air Flow Cabinets
Laminar flow principle involves double filteration of air
through coarse Pre-filters (upto 5 microns) and HEPA filters (down to
0.3 microns) for filteration of Biological & Particulate
contaminants. A constant uni-directional air flows either Horizontally
or Vertically, is drawn from atmosphere and passed through pre and Hepa
filters on to the work surface. Fabricated out of reinforced pest and
weather resistant Duro-board which is clad in from outside in
laminated sheet and inner exposed areas are finished in Epoxy paint.
Table top stainless steel sheet. Side panels are fixed and made of
clear plexiglass. Front door is folding & made of clear plexiglass.
Prefilters : DOP tested as per Standard BS:2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.
Hepa Filters : Made of Microglass fibre with
corrugated aluminium foil separators. DOP tested as per Standard US fed.
209B. Efficiency 99.97% down to 0.3 microns.
Blower Units : Assembly of AU or equivalent motor
workable on 220 V AC 50 Hz single phase, dynamically balanced blowers
making the unit least vibrant with minimum noise level.
Lighting : Fluorescent tube lights.
Sterilization : Germicidal Ultra Violet (UV) tube.
manometer : Static pressure thick Acrylic block type.
JCA-07 (Horizontal or Vertical flow)
Working Chamber : 02 03 04 06 08
2x2x2 3x2x2 4x2x2 6x2x2 8x2x2
Hepa Filters 1 1 1 2 2
Prefilters 1 1 1 2 2
Illumination 1x20W 1x20W 2x40W 2x40W 2x40W
U.V. 1x15W 1x15W 1x30W 1x30W 2x30W |
(a) Gas Cock-brass chrome plated.
(b) Exhaust system.
(c) Virus burn-out unit.
Spares like Hepa Filters & Pre-filters are also available. |
K-System : The K-System encomposses
the specialist requirement of ocyte, sperm and embryo handling during
ivf/Gift procedures in both animal and human reproduction. The K-system
is often built into a Laminar Flow Cabinet. The utensils are warmed by
the heating of part of the table plate of the cabinet.
The transmitted light source and the regulation transformer
for the stereo microscope are located under the stainless steel table
plate, with a window for transmitted light built into the table plate. |
ADVANTAGES of the K-System :
1. Maximum working area in Laminar Flow Cabinet.
2. Handling of ocytes and embryos on one level.
3. All ocytes from one patient in one storage tray.
4. Ocytes stored in cabinet untill insemination.
5. Cleaning is easy and sterilization possible. |
Laminar With All Stainless Steel Body / Sealing / Wall Hanging Can Also Be Fabricated
Suitable for Pharmaceutical Industries as per the requirement. |
|
|
|
|
Bio Safe Biological Safety Cabinet
JCA-011 : ‘Class 100’ Laminar Air Flow
BIOSAFE Biological Safety Cabinet complies with the guidelines laid
down by U.S. National Institute of Health, and the specifications of
British Standard 5726 — Appendix A for class II Biological Safety
Cabinets.
In addition to normal feature of Laminar Flow, It is provided with following unique features:
Re-Circulation of Air - offering highest level of cleanliness.
Sliding Sash - renders unit convertible for use as a conventional vertical laminar down flow clean air work station.
Filtered Exhaust - protects ambient environment, and avoids build up, air borne particles.
Supplementary Air Barrier - prevents contamination through make up air.
Glove Ports and Gauntlets - permits working with medium to low-risk organisms, pathogenic cultures.
Built in U.V. Germicidal light - facilitates sterilization of working area before and after use.
Supplied complete as above, with cord and plug, suitable to work on 220 volts single phase, 50 Hz, Ac supply.
Available in working sizes :- 4x2x2 , 6x2x2
|
|
|
|
Dehumidifiers
JCA-08 : Designed to remove excess
moisture from atmosphere when manufacturing activities of tablets,
capsules and air accuracy is required. Humidity can be brought down to
30% RH with accuracy of 3% RH.
Capacity : (i) 1 Ton. (ii) 1.5 Ton. (iii) 2 Ton. (iv) 3 Ton.
|
|
|
|
Bio Safe Biological Safety Cabinet : Class I
JCA-021 : These class I safety cabinet
provide protection for the operator and the environment, with inward
airflow away from the operator. Air is filtered before release to the
atmosphere.
Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.
These cabinets are self contained 100% exhaust containment enclosures.
Air from the work zone passes through a two-stage, high efficiency
filter system before being exhausted to the room/atmosphere. These
cabinets may be installed on standard laboratory benches or on
optional support stands.
Personel and environment protection is provided by inward flow of room
air at the work area and high-efficiency particulate air (HEPA)
filtration of exhaust air. The inward airflow sweeps aerosols
generated during the work process away from the operator into the filter
system. A prefilter protects the HEPA filter from large particles,
and the HEPA filter removes particulate contaminates down to
sub-micron size from the exhaust air.
Supplied complete as above, with cord and plug, suitable to work on 220 volts single phase, 50 Hz, Ac supply.
Available in following sizes :-
Work area 4x2x2 , 6x2x2
|
|
|
|
Garment Storage Cabinet
JCA-031 : Self standing providing down
flow clean air to clean room Garments. Recommended in change rooms.
Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc.
Supplied complete with HEPA & Pre filter, Motor Blower. Static
Pressure Manometer & Built in U.V. Germicidal Light.
Model 03 04
Working Area 3x2x5,4x2x5
Size of HEPA filter 3x1,5x6,4x1,5x6
No. of HEPA filter 1 1
(Supplied with Pre filters)
Optional Accessories :-
Exhaust Ducting per running feet.
|
|
|
|
Sterile Material Storage Cabinet : (vertical Flow)
JCA-041 : Self standing, down flow
clean air cabinet for use in clean rooms for storage of materials.
Suitable for Pharmaceuticals, Hospitals and O/T, Electronic Industry
etc. Supplied complete with HEPA & Pre Filter, Motor Blower,
Shelves. Static Pressure Manometer & Built in U.V. Germicidal
Light
Model 03 04
Working Area 3x2x5 ,4x2x5
Size of HEPA Filter 3x1.5x6,4x1.5x6
No.of HEPA Filter 1 1
No. of Shelves 2 2
(Supplied with Pre filters)
Optional Accessories :-
Exhaust Ducting per running feet.
Extra Shelves
|
|
|
|
Tissue Culture Hoods / Aseptic Cabinet
Jca-06 : Elegant equipment with overall
dimensions 1220 x 610 x 610 mm having front horizontal swing door
opening of 1050 x 405 mm (frame) fitted with transparent plexiglass.
Complete with fluorescent lighting and germicidal ultra violet tube.
|
|
|
|
Portable Tissue Culture Racks
JCA-010 : Offering a high quality of
tissue culture rack with following features: Fabricated out of aluminium
square pipe OR Angle fitted with sturdy castor wheel for smooth
shifting movement of the unit, Shelves are made of wooden with aluimnium
clad or frosted glass. Each shelves has been provided with four
fluorescent tubes of 4’size. The unit is workable on 220V AC 50Hz single
face. Heavy duty electronic chokes have been mounted seperately on each
shelf.
Available Shelves : 4 Shelves, 5 Shelves, 6 Shelves
Photopereodic Timer
|
|
|
|
Inoculation Hood
JCA-06A : Economical Clean-Air equipment to be used as dust and bacteria-free environmental enclosure.
Fabricated out of pest and weather resistant Duro-board or mild steel
sheet. Wood construction clad in laminated sheet from outside and
inner exposed parts painted with Epoxy paint. The mild steel model is
enamel painted.
Provided with rectangular, tight coverable opening on one side for
putting the material in the chamber and two coverable round openings
in front for handling of the material. A clear Acrylic fixed window in
front provided for observation.
Complete with fluorescent lighting and germicidal Ultra Violet (UV) tube.
Chamber Sizes : (i) 40 x 24 x 20 (ii) 27 x 20 x 16
|
|
|
For further details contact us at:
Microteknik India
Address: 2759, Timber Market,
Ambala Cantt. - 133006.
Haryana
- India.
Moblie: +91 9896044855
Phone: + 91 - 0171 - 2640855
+ 91 - 0171 - 2644991
+ 91 - 0171 - 4006791
Fax: + 91 - 0171 - 4001891
Email: info@microteknik.com
microteknik@gmail.com
No comments:
Post a Comment